Manufacturing High-Quality UP-6119 Ashing Muffle Furnace

Power	2.5KW	2.5KW		4KW	5KW	9KW	16KW	18 KW
Chamber size (DXWXH)	200X150 X150	300X200 X120mm		300X200 X200mm	300X250 X250mm	400X300 X300mm	500X400 X400mm	500X500 X500mm
Dimension(WXDXH)	410560 660	466X616 X820		466X616 X820	536X626 X890	586X726 X940	766X887 X1130	840X860 X1200
Number of heating surface	4 surface heating
Supply voltage	220V		220V		220V	380V	380V	380V
Phase	single phase		single phase		single phase	three phase	three phase	three phase
Heating element	Imported resistance wire (Kan-thal A1, Sweden)
Control mode	UAV program temperature control instrument (standard)1, 30-stage program temperature control intelligent PID adjustment. 2. With over-temperature protection, the electric furnace heating circuit is automatically cut off when the temperature is over-temperature or broken, (when the electric furnace temperature exceeds 1200 degrees or the thermocouple is blown, the AC relay on the main circuit will be automatically disconnected, the main circuit is broken. On, the ON light on the panel is off, the OFF light is on, and the limited protection electric furnace). 3, with 485 communication interface (standard when purchasing software) 4, with power-off protection function, that is, when the power is turned on after the power is turned off, the program does not start from the starting temperature, but the furnace temperature rises from the time of power failure. 5, the meter has the function of temperature self-tuning
Furnacematerial	1. High-quality high-purity alumina polycrystalline fiber curing furnace formed by vacuum suction filtration.2. Formed by Japanese technology. 3. The spacing and pitch of the resistance wires in the furnace are all arranged according to the best thermal technology in Japan, and the temperature field is simulated by the thermal software. 4, using 4 sides heating (left and right, four sides), the temperature field is more balanced
Control accuracy	+/- 1 ℃
Maximum temperature	1200 ℃
Rated temperature	1150 ℃
· Thermocouple Type	K Type
Trigger	Phase-shifted trigger
Maximum heating rate	≤30℃/ Min
Recommended heating rate	≤15℃/ Min
Safety protection system	The furnace is equipped with safety and air switch when the current exceeds the rated current of the open air, the open air will automatically jump, effectively protecting the furnace
Door opening protection system	The furnace is equipped with travel switch when the furnace door is opened, the main electric furnace will automatically power off
Silicon controlled	· SEMIKRON 106/16E
Ambient surface temperature	≤35℃
Warranty period	One year warranty, lifetime technical support Special note, parts such as heating elements, sample files, etc. are not covered by the warranty. Damage caused by the use of corrosive gases is not covered by the warranty
Notes	1. For safety, please put the furnace in a ventilated place.2. In order to improve the service life of the furnace, we recommend that the heating rate not exceed 10 °C / min. The cooling rate does not exceed 5 ° C / min. 3, the furnace has no vacuum sealing, prohibiting the introduction of toxic or explosive gases 4. It is forbidden to place the material directly on the bottom of the furnace floor. Please place the material in the special concrete. 5, when heating, do not touch the heating element and thermocouple 6. When not in use for a long time, please use the oven again.

UP-6119 Ashing Muffle Furnace

PRODUCTS DETAILS

Hot Products

UP-3018 Luggage roller drop test equipment, Luggage roller testing machine

UP-6039 Interlayer Internal Binding Strength Tester

UP-6033 Computer Softness Tester,Paper Softness Test Machine T498SU

HB-3000/3000B Brinell Hardness Tester

UP-6300 Waterproof Rain Simulation Test Chamber

UP-6025 Coating wear tester Alcohol abrasion testing machine

UP-3004 Water Impact Penetration Tester

UP-6003 IEC60335 Printed Circuit Board Covering Scratch Test Machine

HBS-3000 (electronic afterburner) touch screen digital display Brinell hardness tester

UP-6195 Electronic Component Climate Resistance Test Chamber

Contact us